SMOK H Priv 2 Kit

The SMOK H Priv 2 Mod Kit includes the all new TFV12 Big Baby Prince Tank. SMOK H-Priv 2 mod with the rectangular-shaped body embodies strong masculine energy, and the front and back share the same style. Features the friendly large fire key and top OLED screen, it is easy to operate and watch the vaping date clear. Power by dual 18650 batteries, it wattage can up to 225W. Working with the multiple V8 baby cores, it will bring the different denser cloud and purer flavor. Based off of the initial design of the TFV12 Prince, the TFV12 Big Baby Prince with SMOK mesh coil takes all of the features and embraces them tenfold. Featuring large dual cyclops adjustable airflow, this tank allows you to finely tune the air until you find that sweet spot. The diameter in center chimney has also been enlarged to allow more air to travel through the tank for the least amount of air restriction. While the swivel top fill feature remains generally the same, the fill port size has increased for easier filling and less of a juicy mess. Smok's famous TF sub ohm tank series is back at it again with top level performance and innovative designs to make it one of the most sought after sub ohm tanks in the market.

Specs & Features:

• H Priv 2 Mod Size: 52 x 27 x 84.5mm
• TFV12 Big Baby Prince Size: 28 x 55mm
• 225W maximum wattage
• 9.5V maximum voltage
• <500uA standby current
• Dual 18650 batteries (not included)
• 0.1-2.5ohm(VW)/0.05-2ohm(TC) Resistance
• 6ml e-juice capacity
• Stainless steel construction
• 510 thread
• Cobra pattern with side fire button
• Easy-to-read top OLED display
• Dual 18650 cells with 225W
• Firmware upgradable
• USB charging
• All-new TFV12 Big Baby Prince tank
• Patented locking system on top cap
• Compatible with V8 Baby coils
• Top filling design with bottom airflow

Vaporesso Polar Kit

Vaporesso Polar 220w Kit is an elegant vaping device with prismatic appearance. Its firing speed is low to 0.001s. Its upgraded OMNI Board 4.0 integrates Insta-Fire, Super Player Mode and multiple protections. With its 2.5A quick charge, it only takes you 1.5 hours to fully charge this device. The Vaporesso CCELL coil adopted by Cascade Baby SE Tank can bring rapid heating performance and more flavorful vapor. If you are looking for a upgraded powerful kit, Polar is a perfect choice!

Specs & Features:

• Size: 45 x 28 x 144mm
• Capacity: 2ml(TPD Edition)/6.5ml(Standard Edition)
• Battery: 2 x 18650( not included )
• Adjust Mode: Smart VW(H/N/S)/VT(SS, Ni, Ti)/TCR(M1, M2); CCT/CCW/VV/CCV/Bypass
• Power Range: 5-220W
• Resistance Range: 0.03-5ohm
• Display: 2 inch TFT color screen
• Coil: GT 8 Coil 0.15ohm(50W-110W), GT Mesh Coil 0.18ohm (50W-90W)
• 2.5A Charging Time: 1.5h
• Thread: 510 thread
• Dual 18650 battery with 220W max output
• Perfect Prismatic Appearance with 2'' TFT display
• 0.001s Quick Firing Speed
• Upgraded OMNI Board 4.0 Chipset to Ensure High Performance
• Unique Isolation Structure of Cascade Tank to Intense Flavors
• Revolutionary Triangular Airflow to Produce Denser Cloud
• Top Fill System with Safety Lock Mechanism
• Unique GT Mesh Coil to Enlarge Heating Area and Offer Great Flavor
• Compatible with All GT cores
• Optional 6.5ml and 2ml E-juice Capacity
• 2.5A Quick Charge  

Squonk Mod is hot from end of 2017, which is perfect for RDA enthusiast.

Pulse 80W Mod

The Authentic Vandy Vape Pulse 80W Squonk Box Mod is a collaboration by VandyVape and Tony B. The new Pulse BF cheap squonk mod is no longer a mechanical mod, but a regulated mod with built-in chip. With 80W maximum output and 8ml bottom feeder bottle, Pulse BF 80W Mod will bring you better squonking experience. The mod is powered by a single 18650 (adapter included) or 20700 battery (battery not included).

Specs & Features:

• Gene Chip
• Regulated Squonk Mod
• Connection Threading: 510
• Maximum Power: 80w
• Multiple output modes
• Requires a single 18650 battery or 20700 battery (Not Included)
• 18650 battery adaptor
• Resin and Carbon Fibre Panel Versions
• 7ml Squonk Bottle
• 30ml refill bottle
• More information to be confirmed

Lost Vape Furyan Squonk Mod

We are glad to bring the Lost Vape Furyan Mech Squonker MOD to you! As a compact yet fucntional BF MOF, the Lost Vape Furyan is compatible with a single 18650/21700/20700 cell. Just like other mechanical MODs, tt supports a strong output. The Furyan comes with a fire button lock for safe operation. The unique vape accessories material - ULTEM construction makes the Furyan so unique in palms too. It adopts a soft 9ml silicone bottle for better squeezing.

Specs & Feature:

• Depth: 46mm (1.81 inch)
• Height: 5mm (3.35 inch)
• Width: 25mm (0.98 inch)
• Battery support: 18650/20700/21700
• Capacity: 9ml
• Locking fire button
• Easy lock squonk bottle
• Spring loaded 510 connector

Wotofo Recurve RDA

Recurve RDA is a recent collaboration between Wotofo and the well-known YouTube reviewer Mike Vapes. This single coil cheap RDA gets its name from its overall shape, which is a total innovation compared to the existing straight sleeve design on all RDAs available now. The sleeve of this RDA curves like a recurve bow implying energy and efficiency with single vape heating wire for best MTL flavors. It is 24mm in diameter and features side & bottom airflow hitting on postless coil installations to give a sensational flavor burst.

Specs & Features:

• Diameter: 24mm
• Height: 35mm
• Short with a narrowed middle to form a classic curve
• Deck is shaped like a bowl from a sectional view
• Two-directional airflow to enhance flavor production
• Postless single coil design

Package Includes:

• 1 x Wotofo Recurve RDA
• 1 x Spare 810 Drip Tip
• 1 x 510 Drip Tip Adapter
• 1 x User Manual
• 1 x Compwire Coils
• 1 x Japanese Cotton
• 1 x Extra Screws & Orings

Geekvape Ammit RDA

The Geekvape Ammit RDA is a compact MTL RDA that features three-dimensional airflow system transferring air from top to bottom producing unbeatable flavor while retaining leak-proof capability. 10 airflow adjustment options providing the most variable restrictions for different preferences. The Ammit MTL Cheap RDA comes with innovative dual-layer chamber structure to provide outstanding heat dissipation effect.

Specs & Features:

• Material: Stainless Steel
• Colors: SS
• read: 510 thread
• Drip Tip: 510 drip tip
• Top airflow control system
• Air holes on two side
• Two deep juice wells
• Can using on the squonk mod

Package Includes:

• 1 x Ammit MTL RDA
• 1 x Stainless Steel Drip Tip
• 1 x Drip Tip ID
• 1 x Allen Key
• 1 x Spare Parts Pack
• 1 x Flathead Screwdriver
• 2 x Clapton Coil(0.7Ω)
• 1 x User Manual